 |
:
ENGINES & PARTS : |
|||
|
|
Last Updated
-
Monday, February 11, 2008 9:31 AM
|
|||
ADVERTISEMENTS
|
DATE
|
CONTACT |
||
|
PLEASE
CONTACT ME IF IT SOLD, OR IF YOU WANT TO RENEW! |
||||
Selling champ pipes for Polaris 440 Demestic twin 2001 newer, they came off a 2004.Made by redline, cone rolled. $400 + shipping. Please call if interested 1-616-550-3130 I can send pic too. |
02/11/2008 e168 |
|||
2001 hot to go XCR 800 motor, jaws pipes, v-force,cdi,extra parts, motor is good,2500.00 |
01/21/2008 e167 |
Contact: Ed - 306.288.4511 Saskatchewan |
||
1995 Ski Doo Mach Z 780 Triple engine. Perfect for building hillclimber. Mild trail port by Cycle Works, bored .020" over, Wiseco pistons, has been stored inside and has not been run since complete rebuild. Engine, magneto housing and motor mount plates only, does not come with electrical, induction, or exhaust. $1200.00 OBO. 
 |
01/15/2008 e166 |
Contact:Shaun - 780-462-1475 or 780-297-1475. Edmonton Alberta. |
||
Jaws Pipes for SkiDoo Triple |
01/07/2008 e165 |
Contact:Warren 306-236-2999 Saskatchewan |
||
Wanted an in line thermastat and housing |
01/02/2008 e164 |
|||
2000 Anderson Tapered tunnel setup for a triple, outboard Carera Coil over rear shocks, 121" track, Titanium Jackshaft (Heavy duty), Titanium Driveshaft, Silent Chain Drive, Anderson light weight skis,RXL Snopro hood, Very Nice Piece. $2800 US which means the Canadian dollar is at $1.08 to the US $1.00 - Have Pics, call me anytime. PHOTOS |
11/12/2007 e163 |
|||
Jaws race pipes for Polaris 700 or 800 triple, side exit like new cond. $550.00 obo. Trent |
11/12/2007 e162 |
|||
01 800 XCR full mod engine c/w 42mm carbs,ignition,recoil fresh and ready to drop in (no pipes)built by HTG/Mots machine, won 800imp on SSRA curcuit 2 years running. raced by Haywire racing.$3000.00 obo |
11/06/2007 e161 |
|||
Polaris 600 triple full mod engine complete with pipes,42mm carbs,ignition,recoil, race ready $2500.00 |
11/06/2007 e160 |
|||
144" racers edge lightweight suspension, chromemoloy arms, ITS rails,gasbag shocks with adjustable rear shock commpression.$750.00 used on a Polaris but will fit others. |
11/06/2007 e159 |
|||
Ice Track 136 in $800.00 obo Jaws Pipes 700 Rotax Triple |
11/04/2007 e158 |
Contact: Warren 306.236.2999 |
||
Wanted polaris or arcttic cat 700 or bigger twins call me with what you got. |
10/13/2007 e157 |
|||
PSI 1029cc tripple, 70mm RAD crank, 79mm pistons, MSD dip switch ignition, 52mm crankshop carbs pipes, dual fuel pumps New spare race ported cyl spare pistons Have notes & timeslips $6500 |
08/30/2007 |
|||
Complete top end crankshop 1500,incl. cyls,pistons,head,and pipes to fit ck3 chassis,brand new never used.$3000.00 Digitron 2 window display came off of twin cylinder.works excellent,probes included(clamp style) $200.00 I have various skidoo parts for sale,complete pipes and mufler for mach z cke chassis,38mm flatslides(mach z)guages,skis,suspensions(sc-10 136")shocks,dsa arms and more.everything priced very reasonable.drop me an email of what you need and I'll let you know if i have it,or can get it,and give you a price. |
08/07/2007 e155 |
|||
Wanted 800 crankshop race pipes to fit ck3 chassis |
06/19/2007 e154 |
Contact:Brent Arnold 1-306-222-0555 Alberta Email: arnoldracing@hotmail.com |
||
Jaws 700 triple rotax pro stock pipes for S chassis 3-44 MM lectron carbs with 2 sets of needles |
05/26/2007 e153 |
|||
1999 mach 1 motor for sale,(3000Km's),stator and cdi,ck3 stock pipes.$1700 obo. |
05/22/2007 e152 |
|||
Cutler 1000cc laydown motor to M-series chasis.Built in late 05.600 miles .high and low compression heads.Comes with it all....Boondocker,high fuel pump,8100rpm pipes,v-force reeds,digatron,motor runs on 91 octane with low comp heads.205hp.This is a rocket..Trust me.im just lacking a little hp to keep up with the big guns.It will fit in a firecat chassis but the pto pipe is a tad bit close to the hood.but will work.The deal is,u give me a stk 700 laydown and $3500.00 and this 1000 is yours.All ready to go.This is pretty fair price.This a pricy motor to build from bottom up... |
04/06/2007 e151 |
|||
2002 or 2003 polaris stock pipes to fit gen2 chassis asking $200.00 set of simmons skis purple in color for polaris asking $200.00 136icnh track ice or grass with 216 woodys picks asking $600.00 snow track 144x2 track brand new asking $500.00 |
03/31/2007 e150 |
|||
XCR 800 engine,complete with carbs pipes and ignition $2100 |
02/08/2007 e149 |
Contact:Bryan Kakela 701-370-0003 Email: bkak@hotmail.com |
||
1200 PSI Engine, 250 Hp trail engine. 60 miles on it. Adjustable heads. |
01/20/2007 e148 |
Contact:
Warren 306-236-2999 Saskatchewan |
||
Twin Jaws Pipes for ZX chassis 800--$650 |
12/31/2006 e147 |
Contact:Michael
(780) 623-2529 Alberta Email: moparmuscle_04@hotmail.com |
||
HTG 1000 Race engine, 70 mm stroke * 77 mm bore, VES cylinders, megatron carbs, htg pipes, 260 hp @ 9400rpm, $4500 OBO |
12/31/2006 e146 |
Contact:Bryan
Kakela 701-370-0003 Email: bkak@hotmail.com |
||
| Wanted
a good 454 rotax for a 9500 Blizzard. Have 2 340 rotax's for 7500 blizzard. |
e145 |
|
||
| 95 Skidoo 600 triple improved race motor 160 hp at 8600 rpm, built by split second performance. Engine is a proven winner complete with carbs ignition @ Jaws pipes to fit 94 -97 chassis |
12/08/2006 e144 |
|
||
| New hood for 2004 ski-doo legend 600. Black, complete with decals. |
12/08/2006 e143 |
|||
| For sale: 3-44mm lectron carbs- $700.00 |
12/08/2006 e142 |
|
||
| ONE OF THE MOST POWERFUL 800'S IN THE WORLD. 800 Triple Rotary Valve Magnesium case - 3 time world championship engine. The snowmobile has never had 2nd place with this engine. The very best money can buy. Completes complete less pipes. $6500.00 Less Carbs $5750.00 THIS ENGINE IN OUR SLED ON ICE - 5.18-5.25secs 125-128MPH IN 660FT. THIS ENGINE IN OUR SLED ON GRASS - 4.41second in 500 feet. |
11/30/2006 e141 |
|
||
| 809 / 925 Jaws large tube race pipes came off a 225hp 925 triple for sale like new $900.00 obo Thanks |
10/31/2006 e139 |
|||
| 95 polaris xcr motor for sale it comes complete with carbs clutch recoil cdi and coils and the exhaust. it had 3600 miles on the sled when i parted it runs great good compression. 350.00 |
10/24/2006 e138 |
|||
| Brand new heavy hitter weights, 60-80 gram adjustable for Polaris.$200.00 ObO Also V-force reeds and stock reeds to fit Arctic Cat 600, 800, or a 1000. |
10/24/2006 e137 |
|
||
| 2000/2001 Polaris 800 Twin Slp pipe and can, Carbs and electrical included good strong running engine 1874 miles $1700 OBO
|
10/24/2006 e136 |
|
||
| 121 wahl suspension aluminum wheels,fox shock,super slippery slides.wahl cleeted track and drivers.$550.00 obo |
10/13/2006 e135 |
Contact:scott ethen 701-202-2358 Email: scott.ethen@nd.ngb.army.mil |
||
| 136" x 2"
track (challenger) for sale,i am asking $400 for it for more info
email me please.
|
10/13/2006 e134 |
|||
| Ive got twin pipes for a open mod firecat 700 03 to 05.Jaws are the make.They rev at 9300rpm.best pipes out there to make the power.Like new....$650.00 bottom end from a 99 summit 600.U can have the crank or the cases.Crank is rebuilt so it has no miles on it.$350.00 crank and $150.00 for the cases.. ski-doo 521cc twin liquid cooled engine with top fresh oem pistons..no cdi but has stator.ready to run.big stock carbs are included with the deal.$650.00 |
10/01/2006 e133 |
|||
| -Avenger 3 with exhaust probes 400.00$ -Team performance tss 98 secondary for ski-doo-new 200.00$ |
09/29/2006 e132 |
|||
| 1000 cc Crankshop Twin Rotary valve complete turn key $7500. Has Won 9 World Series events 1000 open and 1000 heavy mod. runs 4.90's to 5.00's 800 cc Crankshop/Union Bay Triple Rotary valve complete less carbs and pipes, this engine has won the World Series Woody's challenge in 2003 and 2004, also the Canadian World Series 800 open 5.18's to 5.20's $6500 note this is a magnesium block casted. Both engines are fresh and have spare pistons. Call anytime. |
09/29/2006 e131 |
|||
| 2003 Polaris 600 twin w/exhaust valves.Full race engine,44mm lectrons,Jaws pipes, dynoed at 160hp@8800 rpm.Complete package with recoil and electrical included $3100.00 obo. |
09/23/2006 e130 |
|||
| Old Polaris grass drag chassis & parts $1000 takes all. |
08/24/2006 e129 |
|||
| Yamaha single cyl. engines 295, Race ready with tapered crank for new style clutches. $400.00 complete. titanium drive shaft (SLP) very lite,with ten tooth drivers(4). New shape,used on ash/sled. $300.00 |
07/02/2006 e128 |
|||
| Wahl Broes Racing 121" grass and ice suspensions. Cleated and rubber track 121" and 136" Grass and ice racing tracks. Rubber and cleated. Studded and bare, some brand new! |
05/
28/2006 e126 |
|||
| set of crank shop 800 imp pipes for ck3 chassis also stock 800 flat slide carbs bored to 40 mm |
04/30/2006 e126 |
|||
| SET OF PSI PIPES FOR A 809 CK3 CHASSIS |
04/30/2006 e125 |
|||
 Startingline
85-8700 rpm XCR pipes to fit Gen.II chassis. |
03/20/2006 e124 |
|||
| 1000 Dual Rotary Rotax. Complete with carbs, pipes and ignition 809 Rotax. Full race porting, carbs, pipes and ignition 3- 670 Full race porting. One with 52 Crankshop carbs, Jaws pipes and ignition. One with Split Second pipes, carbs and ignition. One with Split Second Pipes, full race porting, carbs and ignition. 440 Rotax. Full race porting, carbs, ignition, pipes. 809 Rotax Union Bay porting. Carbs, Crank Shop Pipes, and ignition. 600 Rotax Triple.
Union Bay Porting, Crank Shop Pipes and ignition. |
03/14/2006 e123 |
|||
97 xcr sp 440 fuji twin for sale. Replaced oem pistons with Wiesco pistons and rings. Have about 40 miles on the new pistons. Reason for selling I replaced the old motor with a 05 IQ 440 motor. Have everything out of old set up except carbs and primary clutch. |
03/07/2006 e122 |
|||
| 970 price perf eng 15:1 comp.slp twin pipes,04 pro-xr 440 cdi box,48mm lectron carbs. $6500 cdn. |
03/06/2006 e121 |
|||
| New Wahls graphite slides for c-7 suspension paid $200.00 will sell for $125.00. Flak jacket, black with thin green trim $100.00 size medium. |
02/02/2006 e118 |
|||
| THIS ENGINE HAS WON MANY BIG RACES,02,03 W/S 1000IMP.5.60@119MPH,04 W/S #2 QUALIFIER IN P/S SHOOTOUT (5.31)ENGINES A PROVEN WINNER, PROBABLY ONE OF THE MOST HIGHEST HP ENGINE D&D PRODUCED,THIS ENGINE WAS PURCHASED FROM GLENN HALL, ENGINES COMPLETELY FRESH WITH A NEW RAD STROKER CRANK AND TOP/HALF, ENGINES PRESENTLY IN MY P/S CHASSIS AND WILL RUN LOW 5.s TO MID 5.s all day @ 628lbs,selling engine only WITH HOLLEY IGNITION (no carbs or clutches) serious inquiries only! $8000.00us or best offer! IT'S NOT TO LATE TO BOLT IN THIS ENGINE FOR THE UPCOMMING 06 W/S AND IF NOT SOLD BY THEN,I WILL HAVE SLED THERE. |
01/31/2006 e117 |
Contact:JUNIOR PARISIEN |
||
 |
PLEASE
CONTACT ME IF IT SOLD, OR IF YOU WANT TO RENEW! |
|||